A compact kit for instant and precise moisture testing of concrete floors and ambient conditions is the ideal non destructive test kit for monitoring the most crucial information at the time of install. The Tramex CME5 moisture meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. The Ambient Feedback Datalogger is used for testing, monitoring and time logging relative humidity, temperature and dew point in the environment. The Contact Temperature Probe provides temperature readings of the floor surface. The Flooring Installer Tech Kit comes with an extension handle in a Tramex Easy-travel case. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places.
CONCRETE MOISTURE ENCOUNTER 5 - CME5 - MEASURING RANGE:
FEEDBACK DATALOGGER DL-RHTX MEASURING RANGE:
RELATIVE HUMIDITY SENSOR SPECIFICATIONS:
TEMPERATURE SENSOR SPECIFICATIONS:
CONTACT TEMPERATURE PROBE MEASURING RANGE:
SPECIFICATIONS OF KIT:
The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with BS 8201, 8203, 5325 and ASTM F2170 for the flooring industry, and is ideal foruse by Flood & Water Damage Restoration and Indoor Air Quality professionals. The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. The confidence in knowing you are testing with the best and fastest RH probe, together with the complete Tramex concrete moisture testing system, brings reliability and peace of mind to a whole new level.
The RHIE2 Electronic Interface cable connects the Hygro-i® & Hygro-i2® RH probes to CMEX2 & MRH3 non-destructive moisture meters (Product Order Code: RHIE2)
The RHIE2B Electronic Interface cable connects the Hygro-i® & Hygro-i2® RH probes to the Feedback Datalogger DL-RHTX and the CMEX5 (Product Order Code: RHIE2B).
The Hygro-i2 ® probe provides measurements of humidity, temperature and dew-point in structural materials such as concrete flooring and walls as well as the environmental conditions within the building structure allowing the user to perform in-situ & hood type RH testing to comply with ASTM F2170 & BS 8201,8203, 5325.
The IRT2 is a handheld, dual laser, non-contact Infrared Thermometer with 12:1 distance to spot ratio and audible and visible high/low set point alarms. It is used to measure and display surface temperatures within the range of -50°C to 650°C (-58ºF to 1202ºF) and has an accuracy of approximately 1 to 1.5% (see Specifications for details). The IRT2 has a fast response time (0.15 sec) and is powered with a 9V battery and complies with Class II UK/EU laser safety standard EN60285.