MENU

RIK - ROOFING INSPECTOR KIT

NON DESTRUCTIVE FLAT ROOF SCANNER FOR LEAK DETECTION, TRACING AND MOISTURE MEASURING AND SURVEYING

WITH ACCOMPANYING BLUETOOTH APP

The Tramex RIK allows for point-of-contact, non-destructive moisture testing in roofing waterproofing systems up to approximately 4 inches in depth with the RWS Roof & Wall Scanner. The kit also allows for non-destructive measurement of moisture conditions in concrete decks and pin readings in wood decks and roofing materials, relative humidity readings, and ambient and dew point conditions using the Tramex CMEX5 digital moisture meter and probes. An infrared surface thermometer gives surface temperature. The Tramex Roofing Inspection Kit comes with an extension handle in a protective heavy-duty carrying case with die-cut foam lining. Bluetooth connectivity to the Tramex Meters App allows for visualization of Tramex CMEX5 readings and data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts, as well as see your CMEX5 meter screen on your phone when extending to hard to reach places.

Product Order Code: RIK

  1. Concrete Moisture Encounter X5 - CMEX5.
  2. RWS - Roof and Wall Scanner.
  3. App available for Android and iOS (phone not included).
  4. Hand held electrode with 7.8" (200mm) insulated pins.
  5. 10" (260mm) narrow RH probe.
  6. Hole punch.
  7.  Infrared Thermometer.
  8. Extension Handle (for RWS).

ROOF AND WALL SCANNER - RWS - MEASURING RANGE:

  • Depth of penetration: 4" (100mm)
  • Sensitivity:
    • Four Ranges:
      • Roofing Mode with high and low sensitivity.
      • EIFS / Foam Roof Insulation Mode with high and low sensitivity.

 

CONCRETE MOISTURE ENCOUNTER X5  - CMEX5 - MEASURING RANGE:

  • Depth of penetration in concrete: approx.  ¾" (20mm)
  • Moisture content for Concrete: 0 → 6.9 %
  • Comparative for Gypsum floor screed: 0 → 12  
  • CM Equiv Anhydrite/Concrete: 0→2.7 / 0→4.3
  • Reference scale: 0 → 100
  • Relative Humidity (including with Hygro-i2 ® probe):  0 → 99%                                   
  • Humidity accuracy: 0% to 99%RH +/- 2% @ 25°C/77°F      
  • Moisture content for wood with wood pin probes: 5 → 30 %

 

INFRARED THERMOMETER IRT2

  • Temperature range: -58ºF ~ 1202ºF (-50 to 650 ºC)  
  • Distance to Spot ratio: D:S = 12:1
  •  Display resolution: 0.1 ºF(0.1ºC)   <1000 1ºC   >1000
  • Accuracy for targets: Assumes ambient operating temperature of 73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC)  ±4.5ºF(2.5ºC) 68ºF ~572ºF (20ºC ~300ºC)   ±1.0% ±1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC)  ±1.5% 
  •  Repeatability: -58~68ºF (-50~20ºC)  :  ±2.3ºF(1.3ºC ) 68~1202ºF (20~650ºC): ±0.5% or ±0.9ºF (0.5ºC)
  •  Response time: 150ms
  •  Spectral response: 8~14um
  •  Emissivity: Digitally adjustable from 0.10 to 1.0
  •  Over range indication: LCD will show “----”
  •  Polarity: Automatic (no indication for positive polarity); Minus (-) sign for negative polarity
  •  Diode laser output: <1mW,Wavelength 630~670nm, Class 2 laser product
  •  Operating temp.: 32 to 122ºF(0 to 50ºC)
  •  Storage temp.: 14 to 140ºF (–10 to 60ºC)
  •  Relative humidity: 10%~90%RH operating, <80%RH storage
  •  Power supply: 9V battery, NEDA 1604A or IEC 6LR61, or equivalent
  •  Safety: “ CE ” Comply with EMC

 

SPECIFICATIONS OF KIT:

  • Size: 19.2” x 14.9” x 5.7” (487mm x 380mm x 145mm)
  • Weight: 9.9 lbs (4.51kg)
  • Power: 2 x 9 volt PP3 Batteries, 2 x AALR6 ALKALINE (Included)

Related Products

Calibration Salt Check

SAL75N - CALIBRATION SALT CHECK

Calibration Salt Check for use with the Tramex RHP-NW RH Probe & Tramex RHP-SNW RH Probe

SAL75N
More Info

Roofing Master Kit

ROOFING MASTER KIT

The Roof Master Kit is the complete kit for the Roofing Professional, including the Dec Scanner and the RWS Roof & Wall Scanner allowing for continuous and point-of-contact, non-destructive surveying of moisture conditions in roofing and waterproofing systems up to 152mm (6 inches) in depth. 

RIK
More Info

Dec Scanner

DSAL - DEC SCANNER

The Tramex Dec Scanner is a mobile non-destructive impedance scanner designed for the instant surveying of moisture conditions in roofing and waterproofing systems per ASTM D7954. Ideal for water leak detection in roofing materials and integrity testing. Roofing Moisture meters detect leaks in roofing materials as well as measure moisture.

DSAL
More Info

Accessory Pack for CME5 AND CMEX5

AP-CM ACCESSORY PACK FOR CME5 AND CMEX5

The Accessory Pack for the Concrete Moisture Encounter 5 - CME5 and Concrete Moisture Encounter X5 - CMEX5 consists of a Calibration Check Plate, an extension handle and a handy holster pouch.

AP-CM
More Info