- Dec Scanner
- RWS - Roof and Wall Scanner + telescopic handle (for use on roofs).
- Concrete Moisture Encounter X5 - CMEX5.
- App available for Android and iOS (phone not included)
- Hand held electrode with 7.8" (200mm) insulated pins.
- 10" (260mm) narrow RH probe.
- Hole punch
- Infrared Thermometer
- Extension Handle for CMEX5.
DEC SCANNER - MEASURING RANGE:
- Depth of penetration: 6” (152 mm)
- Measuring Range: 0 to 100 Comparative
- Limitations: Some EPDM, Butyl rubber roofing and other conductive roofing.
ROOF AND WALL SCANNER - RWS - MEASURING RANGE:
- Depth of penetration: 4" (100mm)
- Sensitivity:
- Four Ranges:
- Roofing Mode with high and low sensitivity.
- EIFS / Foam Roof Insulation Mode with high and low sensitivity.
CONCRETE MOISTURE ENCOUNTER X5 - CMEX5 - MEASURING RANGE:
- Depth of penetration in concrete: approx. ¾" (20mm)
- Moisture content for Concrete: 0 → 6.9 %
- Comparative for Gypsum floor screed: 0 → 12
- CM Equiv Anhydrite/Concrete: 0→2.7 / 0→4.3
- Reference scale: 0 → 100
- Relative Humidity (including with Hygro-i2 ® probe): 0 → 99%
- Humidity accuracy: 0% to 99%RH +/- 2% @ 25°C/77°F
- Moisture content for wood with wood pin probes: 5 → 30 %
INFRARED THERMOMETER IRT2
- Temperature range: -58ºF ~ 1202ºF (-50 to 650 ºC)
- Distance to Spot ratio: D:S = 12:1
- Display resolution: 0.1 ºF(0.1ºC) <1000 1ºC >1000
- Accuracy for targets: Assumes ambient operating temperature of 73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC) ±4.5ºF(2.5ºC) 68ºF ~572ºF (20ºC ~300ºC) ±1.0% ±1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC) ±1.5%
- Repeatability: -58~68ºF (-50~20ºC) : ±2.3ºF(1.3ºC ) 68~1202ºF (20~650ºC): ±0.5% or ±0.9ºF (0.5ºC)
- Response time: 150ms
- Spectral response: 8~14um
- Emissivity: Digitally adjustable from 0.10 to 1.0
- Over range indication: LCD will show “----”
- Polarity: Automatic (no indication for positive polarity); Minus (-) sign for negative polarity
- Diode laser output: <1mW,Wavelength 630~670nm, Class 2 laser product
- Operating temp.: 32 to 122ºF(0 to 50ºC)
- Storage temp.: 14 to 140ºF (–10 to 60ºC)
- Relative humidity: 10%~90%RH operating, <80%RH storage
- Power supply: 9V battery, NEDA 1604A or IEC 6LR61, or equivalent
- Safety: “ CE ” Comply with EMC
SPECIFICATIONS OF KIT:
- Size: 41.2" x 21.1" x 12" (1045mm x 535mm x 305mm)
- Weight: 59.5lbs (27kg)
- Power: 4 x 9 volt PP3 Batteries, 2 x AALR6 ALKALINE Batteries (included)