MENU

CONCRETE COATINGS INSTALLER TECH KIT

CONCRETE COATINGS INSTALLER TECH KIT

A compact kit for instant and precise moisture testing of concrete floors and slabs and ambient conditions. The Tramex CME5 moisture meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. The Ambient Feedback Datalogger is used for testing, monitoring and time logging relative humidity, temperature and dew point in the environment. The Contact Temperature Probe provides temperature readings of the floor surface. The Concrete Coatings Installer Tech Kit comes with an extension handle in a Tramex Easy-travel case. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places.

Product Order Code: CCTK

  1. Concrete Moisture Encounter 5 - CME5.
  2. Feedback Datalogger DL-RHTA.
  3. Free App available for Android and iOS (phone not included).
  4. Contact Temperature Probe.
  5. Extension Handle.

CONCRETE MOISTURE ENCOUNTER 5  - CME5 - MEASURING RANGE:

  • Depth of penetration:  approx. ¾" (20 mm)  
  • Moisture Content for Concrete:  0 → 6%
  • Comparative for Gypsum floor screed:  0 → 10
  • Reference scale:  0 → 100

 

FEEDBACK DATALOGGER DL-RHTA MEASURING RANGE:

  • Memory: 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature)
  • Logging Rate: Logger interval adjustable between 5 minutes and 1 hour
  • Transmission Range: Up to 165ft (50m) line-of-sight
  • Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising

RELATIVE HUMIDITY SENSOR SPECIFICATIONS: 

  • Range: 0 to 100% RH
  • Accuracy: ±1.5%RH Range 0% to 80%RH ±2.0%RH Range 80% to 99%RH (@ 77ºF (25ºC))
  • Resolution: 0.1% over the complete range
  • Drift:  <0.25%RH per year

TEMPERATURE SENSOR SPECIFICATIONS:

  • Range: -40ºF to 257ºF (-40ºC to 125ºC)
  • Accuracy: ±0.1ºF Range 68ºF to 140ºF  (±0.1 °C Range 20°C to 60°C)
  • Sensor Protection: PTFE Film protects sensor opening from water & dust
  • Drift:  <0.04ºF (0.03ºC) per year 

 

CONTACT TEMPERATURE PROBE MEASURING RANGE:

  • Units: ºF (ºC)
  • Accuracy: ±0.9ºF from 14ºF to 185ºF (±0.5°C from -10°C to +85°C)
  • Temperature Range:  -20°F to +175°F (-30°C to +80°C)
  • Resolution: 0.1% over the complete range.

 

SPECIFICATIONS OF KIT:

  • Size: 13.2” x 9.5” x 3.2” (33.5cm x 24cm x 8cm)
  • Weight: 2.8 lbs (1.3kg)
  • Power:  3 x AA batteries

 

 

 

Related Products

CALCRH - CALIBRATION CHECK PLATE

CALCRH - CALIBRATION CHECK PLATE

CALCRH

Calibration Check Plate Tramex CME5, CMEX5, CME4 and CMEX2.

IRT2 - INFRARED SURFACE THERMOMETER

IRT2 - INFRARED SURFACE THERMOMETER

IRT2

The IRT2 is a handheld, dual laser, non-contact Infrared Thermometer with 12:1 distance to spot ratio and audible and visible high/low set point alarms. It is used to measure and display surface temperatures within the range of -50°C to 650°C (-58ºF to 1202ºF) and has an accuracy of approximately 1 to 1.5% (see Specifications for details). The IRT2 has a fast response time (0.15 sec) and is powered with a 9V battery and complies with Class II UK/EU laser safety standard EN60285.

FBSK - FEEDBACK DATALOGGER STARTER KIT

FBSK - FEEDBACK DATALOGGER STARTER KIT

FBSK

The Tramex Feedback DataLogger and App have been designed and developed by Tramex for professionals who depend on accurate, reliable readings using the very best, state of the art technology and performing ASTM F2170. The Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device. On the App you can visualize Live Readings, Thermal Conditions and Psychrometric Charts, as well as creating and exporting spreadsheets, charts and reports. The Tramex Feedback DataLogger requires the Tramex Feedback Data Logger App and a compatible iOS or Android mobile device.

HIPP - HYGRO-I2 PROBE

HIPP - HYGRO-I2 PROBE

HIPP

The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with BS 8201, 8203, 5325 and ASTM F2170 for the flooring industry, and is ideal foruse by Flood & Water Damage Restoration and Indoor Air Quality professionals. The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. The confidence in knowing you are testing with the best and fastest RH probe, together with the complete Tramex concrete moisture testing system, brings reliability and peace of mind to a whole new level.