Used in conjunction with the Tramex CMEX II or the Tramex MRH III non-destructive moisture meters, the Hygro-i2 ® probe provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete flooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display.
The Hygro-i2 ® probes are reusable, paying for themselves after a few uses compared to single-use, disposable RH probes. Calibration checks can be carried out using the calibration check salts.
RELATIVE HUMIDITY SENSOR SPECIFICATIONS:
Range: 0 to 100%RH
Accuracy: 0% to 99%RH ±2.0%RH (@ 77ºF (25ºC))
Resolution: 0.1% over the complete range
Drift: <0.25%RH per year
TEMPERATURE SENSOR SPECIFICATIONS:
Range: -40ºF to 257ºF (-40ºC to 125ºC)
Accuracy: ±0.1ºF
Range 68ºF to 140ºF (±0.1 °C Range 20°C to 60°C) Sensor Protection:
PTFE Film protects sensor opening from water & dust Drift: <0.04ºF (0.03ºC) per year NIST traceable. (National Institute of Standards and Technology)
